Site Creation

Instructors who wish to use Isidore must create their course sites each semester. These instructions will show you how to create your Isidore course site(s) in four different ways. Course sites will be available for creation approximately 10 weeks before the 1st day of the upcoming term.

Create a Blank Site from Scratch

This option allows you to create an empty (or blank) course site. If you choose this option, you'll be able to select which tools are installed in the course site.

Please see this 2-minute video walkthrough of this process:

1. Click on the Sites menu (3x3 waffle icon) in the upper right-hand portion of the screen.
2. Click on the Create New Site button.
3. Under the "Create a site from scratch" option, select the academic term in which you'll be teaching and select Continue.
4. Any courses that you're listed as the instructor of record will be displayed on the screen. To create a course site, select the check box next to the course you would like to create. Please note that if you select multiple courses during this step, they will be combined into the same course site. If you would like to create separate course sites, you need to create your course sites one at a time. Click on Continue.
   • If you do not see your course(s) listed, click on the I'm unable to find my course or section... link and click on Continue. Select the "Subject", "Course", and "Section" from the drop-down menus and click on Continue.
   • If you still don't see your course listed, click on the Still cannot find your course/section? link and manually enter the "Subject", "Course", and "Section" and click on Continue. A request will go to the Office of E-Learning who will either approve the request or will contact you for more information.
5. Verify your name and email address on the next screen and click Continue.
6. Check the box next to the tools you wish to use in your course site. Please note that students are often annoyed if a tool sits empty all semester, so make sure that you're only selecting tools that will be used during the course. Click Continue.
7. Select whether the course should be published (made available to students) and click on Continue. If you choose not to publish your course site, your course will automatically be published at 8 AM on the first day of classes. If you create your site after this point, you'll need to publish your course site to make it available to students.
8. Click on the Create Site button.
9. Your course site is now available. You may begin modifying it for the upcoming semester.

Duplicate a Site, reusing all content from a previous semester

This option allows you to create an exact copy of another course site. If you select this option, no student submissions, forum posts, or grades will be copied over to the new site. You'll need to update dates and content for the current semester

Please see this 2-minute video walkthrough of this process:

1. Click on the Sites menu (3x3 waffle icon) in the upper right-hand portion of the screen.
2. Click on the Create New Site button.
3. Select Duplicate an existing site or create from template.
4. Select the site you wan to copy.
5. Select the term in which you'll be teaching.
6. Check the box next to "Publish Site" if you'd like the site to become available to students immediately. If you choose not to publish your site at this time, sites will automatically be published by 8 A.M. on the first day of the term.
7. Scroll down to the bottom of the page and click Go to Roster Selection.
8. Any courses for which you are listed as the instructor of record will be displayed on the screen. Select which roster(s) of students should have access to the new site. Please note that if you select multiple rosters during this step, they will be combined into the same course site. If you would like to create separate course sites, you need to create your course sites one at a time. Click on Create Site.
   • If you do not see your course(s) listed, select the "Subject", "Course", and "Section" from the drop-down menus and click on Create Site.
   • If you still don't see your course listed, click on the Still cannot find your course/section? link and manually enter the "Subject", "Course", and "Section" and click on Create Site. A request will go to the Office of eLearning who will either approve the request or will contact you for more information.
9. The site creation process may take a few minutes, depending on how much content is being duplicated.
10. Your course site is now available. You may begin modifying it for the upcoming semester.

Create a Site, using a template

This option allows you to duplicate the template site created by the Office of eLearning. If you select this option, the template will be copied and your roster(s) will be added to the copied site. You will then need to modify the template site for your class. Learn more about the template site.

Please see this 2-minute video walkthrough of this process:

1. Click on the Sites menu (3x3 waffle icon) in the upper right-hand portion of the screen.
2. Click on the Create New Site button.
3. Select Duplicate an existing site or create from template.
4. Select the "Spring 2021 Template" site.
5. Select the term in which you'll be teaching.
6. Check the box next to "Publish Site" if you'd like the site to become available to students immediately. If you choose not to publish your site at this time, sites will automatically be published by 8 A.M. on the first day of the term.
7. Scroll down to the bottom of the page and click Go to Roster Selection.
8. Any courses for which you're listed as the instructor of record will be displayed on the screen. Select which roster(s) of students should have access to the new site.
   Please note that if you select multiple rosters during this step, they will be combined into the same course site. If you would like to create separate course sites, you need to create your course sites one at a time.
   • If you do not see your course(s) listed, select the "Subject", "Course", and "Section" from the drop-down menus and click on Create Site.
   • If you still don't see your course listed, click on the Still cannot find your course/section? link and manually enter the "Subject", "Course", and "Section" and click on Create Site. A request will go to the Office of eLearning who will either approve the request or will contact you for more information.
9. Click on Create Site.
10. The site creation process may take a few minutes, depending on how much content is being duplicated.

Create a Site, reusing some content from specific tools

This option allows you to create a site from scratch, but you can select specific tools you would like copied from another site. For example, maybe you only want to use Assignments from last semester. This option would allow you to do so.

1. Click on the Sites menu (3x3 waffle icon) in the upper right-hand portion of the screen.
2. Click on the Create New Site button.
3. Under the "Create a site from scratch" option, select the academic term in which you'll be teaching and select Continue.
4. Any courses that you're listed as the instructor of record will be displayed on the screen. To create a course site, select the check box next to the course you would like to create. Please note that if you select multiple courses during this step, they will be combined into the same course site. If you would like to create separate course sites, you need to create your course sites one at a time. Click on Continue.
   • If you do not see your course(s) listed, click on the I'm unable to find my course or section... link and click on Continue. Select the "Subject", "Course", and "Section" from the drop-down menus and click on Continue.
   • If you still don't see your course listed, click on the Still cannot find your course/section? link and manually enter the "Subject", "Course", and "Section" and click on Continue. A request will go to the Office of E-Learning who will either approve the request or will contact you for more information.
5. Verify your name and email address on the next screen and click Continue.
6. Check the box next to the tools you wish to use in your course site. Please note that students are often annoyed if a tool sits empty all semester, so make sure that you're only selecting tools that will be used during the course.
7. Under the "Re-use Material from Other Sites You Own" section, select the "Yes, from these sites:" option and select the site(s) you want to copy content from.
8. Click Continue.
9. Select which tools you want to copy content from by checking the box next to them.
10. Click Continue.
11. Select whether the course should be published (made available to students) and click on Continue. If you choose not to publish your course site, your course will automatically be published at 8 AM on the first day of classes. If you create your site after this point, you'll need to publish your course site to make it available to students.
12. Click on the Create Site button.
13. Your course site is now available. You may begin modifying it for the upcoming semester.

If you have any problems or questions during the course creation process, please feel free to contact the Office of E-Learning at (937) 229-5039 or elearning@udayton.edu.

Return to main Isidore page